金属锂负极的成核机制与载体修饰

金属锂具有电位低、比容量高等突出优点,是极具吸引力的下一代高能量密度电池的负极材料,然而存在枝晶、死锂、副反应严重、库伦效率低、循环稳定性差等问题,限制了其实际应用。金属锂负极的成核是电化学沉积过程中的重要步骤,锂在集流体或导电载体上的均匀成核和稳定生长对于抑制枝晶死锂、提高充放电效率和循环性能具有关键作用。本文从成核机制与载体效应的角度概述了锂金属负极的研究进展,介绍了锂成核驱动力、异相成核模型、空间电荷模型等内容,分析了锂核尺寸及分布与过电位和电流密度的关系,并通过三维载体分散电流密度、异相晶核/电场诱导成核、晶格匹配等方面的研究实例讨论了载体修饰对锂负极的性能提升。     

SnO2表面卤化提高钙钛矿太阳能电池光伏性能

钙钛矿太阳能电池(PSCs)成为近几年来迅速发展的新型太阳能电池,其中将SnO₂纳米粒子层用作电子传输层(ETL)的钙钛矿太阳能电池器件得到了广泛的关注。SnO₂有着更低的制备温度,使其具备应用于柔性器件的潜力,但与钙钛矿层能级不匹配等问题限制着其发展。而在界面处加入钝化层,尤其是表面卤化的方法或可解决这一问题。本文综合研究了SnO₂表面卤化对钙钛矿太阳能电池光伏性能的影响,选用四丁基氯化铵(TBAC)、四丁基溴化铵(TBAB)和四丁基碘化铵(TBAI)三种钝化材料对SnO₂表面进行钝化处理,并对钝化材料溶液进行了浓度梯度研究。通过材料形貌、结构和光学性能表征以及电池器件性能测试分析等方法,证明了SnO₂表面卤化可提高钙钛矿层的质量和PSCs光伏性能,并从器件内部电荷传输动力学等角度解释了器件性能改善的原因。为进一步说明其性能改善的机理,采用基于密度泛函理论(DFT)的第一性原理计算方法对材料表面性质进行了深入研究,从能量、结构、电荷密度、态密度、功函数等角度解释了表面卤化提高SnO₂/钙钛矿界面处电子传输特性的原因。实验和理论计算均表明TBAC对于SnO₂具有较好的钝化效果,并随着溶液浓度的提升钝化作用越明显。SnO₂表面卤化作用的深入研究不仅对提高电池器件性能具有实际意义,还能够帮助理解太阳能电池界面现象,为界面改性提供新的研究思路。     

Effect of cationic surfactant cetyltrimethylammonium bromide on the enzymatic hydrolysis of cellulose

Effect of cationic surfactants alkyltrimethylammonium bromide (C_nTAB) with varied alkyl chain lengths on the enzymatic hydrolysis of Avicel and the surface charge of cellulase was investigated. Enzymatic hydrolysis of Avicel increased linearly from 42.1 to 61.4 % with the increase of the concentration of cetyltrimethylammonium bromide (C₁₆TAB) logarithmically from 0.0001 to 0.01 mM, and reached a maximum value at the concentration of 0.01–0.03 mM. When the concentration was increased further, the cellulase solution became positively charged and the enzymatic hydrolysis of Avicel decreased rapidly. With the increasing alkyl chain length, C_nTAB provided more proton and neutralized the negative charge of cellulase more obviously. Therefore, the required concentration of C_nTAB could be less to enhance the enzymatic hydrolysis of Avicel. In addition, C₁₆TAB could enhance enzymatic hydrolysis efficiency of corncob at high solid content from 35.0 to 56.3 %; C₁₆TAB could reduce about 60 % of the cellulase loading in the enzymatic hydrolysis of corncob to obtain the same glucose yield. Effect of C₁₆TAB on the enzymatic hydrolysis of typical pretreated softwood and hardwood was also investigated. This study laid the foundation for using C_nTAB to recover cellulase, and provided the design direction for cellulase with higher activity and better stability by adjusting its hydrophilicity and chargeability.     

傅克烷基化反应在超高交联聚合物中的应用

超高交联聚合物主要是通过傅克烷基化反应来制备的,具有合成简单、多孔、无毒、结构稳定、质轻等特点。本文介绍了傅克烷基化反应的条件和机理,展示了超高交联聚合物的合成方法及这些材料在气体储存/分离、水处理、催化、传感等领域中的应用,并对傅克烷基化反应与超高交联聚合物的进一步结合做出了展望。     

Biomimetic total synthesis and structure confirmation of myrtucommulone K

A confirmed structure of meroterpenoid myrtucommulone K, which is vastly different from the originally reported one, is conducted. The first biomimetic total synthesis towards the assignment of its absolute configuration has been efficiently accessed in 5 steps, and key to the success was a heteroatom Diels-Alder cycloaddition. The structure of myrtucommulone K was re-elucidated and confirmed by extensive spectroscopic interpretation of 1D and 2D NMR.     

Direct access to α,α′-diarylated ketones through N-heterocyclic carbene-catalyzed 1,6-addition of aromatic aldehydes to para-quinone methides

N-Heterocyclic carbene-catalyzed 1,6-addition of aromatic aldehydes to para-quinone methides has been developed. This method could efficiently furnish α,α′-diarylated ketones with good to high yields, which contain various functional groups.     

Transition-metal-free trifluoromethylthiolation and difluoromethylthiolation of thiols with trifluoromethanesulfonyl chloride and difluoromethanesulfonyl chloride

Triphenylphosphine-mediated metal-free trifluoromethylthiolation and difluoromethylthiolation of thiols by CF₃SO₂Cl and CHF₂SO₂Cl to synthesize trifluoromethyl disulfides and difluoromethyl disulfides, respectively, was achieved at room temperature. Iodine generated in situ from iodide facilitated this reaction via the formation of iodotriphenylphosphonium iodide which could serve as a reducing agent in this transformation. Readily available reagents and mild reaction conditions without transition-metals allow this protocol to be more practical than traditional methods.     

Thermally induced reaction of diazoamides with isatins: A complementary approach to the 3,3′-bioxindole derivatives

An efficient and thermally induced reaction of diazoamide with isatin under mild reaction conditions is described, which provides a complementary approach to the 3,3′-bioxindole in high yields with excellent diastereoselectivity. In comparison to the metal-catalyzed versions, this is the only example under catalyst-free conditions via a non-carbene reaction pathway.     

Lateral flow test for visual detection of silver(I) based on cytosine-Ag(I)-cytosine interaction in C-rich oligonucleotides

The authors describe an oligonucleotide-based lateral flow test for visual detection of Ag(I). The assay is based on cytosine-Ag(I)-cytosine [C-Ag(I)-C] coordination chemistry to capture gold nanoparticle (AuNP) tags in the test zone. A thiolated C-rich oligonucleotide probe was immobilized on the AuNPs via gold-thiol chemistry, and a biotinylated C-rich oligonucleotide probe was immobilized on the test zone. The AuNPs labelled with C-rich oligonucleotides are captured by Ag(I) ions in the test zone through the C-Ag(I)-C coordination. The resulting accumulation of AuNPs produces a readily visible red band in the test zone. Under optimized conditions, the test is capable of visually detecting 1.0 ppb of Ag(I) which is 50 times lower than the maximum allowable concentration as defined by the US Environmental Protection Agency for drinking water. Hence, the test is inexpensive and highly sensitive. It was applied to the detection of Ag(I) in spiked samples of tap water and river water. In our perception, the test is a particularly valuable tool in limited resource settings.

Open image in new window

Graphical abstract Graphical Abstract

     

Isothermal and nonisothermal crystallization kinetics of novel biobased poly(ethylene succinate-<Emphasis Type="Italic">co</Emphasis>-ethylene sebacate) copolymers from the amorphous state

In this work, the isothermal and nonisothermal crystallization kinetics of three novel biobased poly(ethylene succinate-co-ethylene sebacate) (PESSe) copolymers was systematically investigated with differential scanning calorimetry under different crystallization conditions from the amorphous state. For the isothermal cold crystallization kinetics study, the Avrami equation could well describe the crystallization process of PESSe at various crystallization temperatures. All three PESSe copolymers crystallized through the same crystallization mechanism; moreover, the overall isothermal cold crystallization rate of PESSe decreased with increasing ethylene sebacate (ESe) comonomer content. The nonisothermal cold crystallization kinetics of PESSe was also studied at different heating rates. With increasing ESe content or heating rate, the nonisothermal cold crystallization exotherm of PESSe copolymers shifted to high temperature range. Both the crystallization rate parameter and crystallization rate coefficient of PESSe copolymers decreased with increasing ESe content, indicating that PESSe copolymer with higher ESe content crystallized more slowly than that with lower ESe content. The Ozawa equation was used to analyze the nonisothermal cold crystallization kinetics of PESSe copolymers, which was found to fit the crystallization process very well.